Garage Door Springs Replacement

    For garage door repairs in San Jose, you better call an expert. Our technicians are standing by to take your call.

    CALL NOW: ☎️ (408) 882-9045

    Or, fill out the form and we will contact you as soon as possible.




    Spam protection:

    Show us some photos for a FREE cost estimate.

    Garage Door Springs Replacement

    Most houses in San Jose have overhead garage doors, and they are the most common type nowadays.

    After a long period of using it, problems and difficulties often arise. The garage door can last a long time, but the spring is prone to failure.

    The most widely known issue that we confront relates to a broken door spring. One of the first signs of a broken overhead door spring is a loud noise caused by the spring going elastic.

    The garage door spring separates into two pieces when it breaks, which leaves a gap around the hinge.

    When the spring breaks, the wire coils spin rapidly and create a loud noise due to the rapid vibrations. The high tension of garage door springs can cause accidents or damage to property.

    If this happens, hire a qualified technician to repair a defective overhead door spring. Always consult a licensed professional to do the job to avoid more injuries to it.

    Let’s first look and see how we can examine and repair the garage door’s springs to get started.

    CHECK THE PROBLEM

    Is it difficult for you to open your garage doors? Have you attempted to obtain a grip on the actual issue?

    Usually, during the inspection, we will notice that one of the springs is already cracked and needs to be changed.

    Our garage door needs immediate attention, as it is one of the annual maintenance tasks.

    The tension spring helps to elevate the garage door with ease. If this is not operating correctly, we may be putting our family members and friends at risk.

    When it is malfunctioning, that produces problems and can lead to danger.

    Regular maintenance work should be a standard practice, but if a garage door has become damaged due to everyday usage, install a new tension spring immediately.

    WAYS TO RESTORE OVERHEAD DOOR SPRINGS

    Here are the methods on how to restore or replace your broken door springs:

    Step 1

    Organize the required tools and equipment.

    Tools and equipment needed: Clamps, Securing pliers, Socket/ratchet kit, winding bars, Battery-powered drill and hammer, Work gloves, Towels, Safety goggles, Adjustable lever, Wrench set.

    Step 2

    Please ensure the door is fully closed. Secure the door with the C-clamp so that the door will not open. It’s better to ensure you’re safe than be sorry in the end.

    Step 3

    Then, turn a screw to soften the spring from the frame. Use a wrench to loosen the fasteners. Keep your grip tight as the spring will push back with great force.

    Loosen the cord to disengage the broken portion. You cannot park your car in the garage until it is perfectly okay to use it again.

    Step 4

    Now, we need to put on the new door spring. Put in the left-hand spring with new bearings and the new center bearing, replacing the lower part components: rollers lift cables, and brackets.

    Wrap the cables and clamp the rubber bands. Winds the overhead door cords and stretches it—quite a challenge for the garage door springs replacement.

    Step 5

    Apply the lubricating oil to the tension spring. For protection, pre-cut a sheet of paper to a position between the spring and the wall. Next, spray the lube on and wipe it off.

    Step 6

    Evaluate the garage door to be sure it is functioning correctly. Take all the screws and nuts off.

    To determine whether the door is balanced correctly, the door should remain stationary. If not, use two quarter turns on each t-handle to keep the door from striking open.

    Very straightforward, right?! Easy as it was said, but it takes a lot of time, experience, and a thorough understanding of the garage door to plan for the restoration.

    We need to learn how to extract the pieces, the function, and the correct procedure and position it back up to the small details.

    If you are unsure how to execute the said steps, we recommend seeking assistance from a reliable garage door company like San Jose Garage Door Doctor.

    As we have already said, a faulty overhead door can be hazardous for us.

    It might cost you a little more cash than hiring a specialist, but it’s best to let the professionals manage it if you’re not confident enough to fix it.

    HIRE THE GARAGE DOOR EXPERTS IN SAN JOSE

    In San Jose Garage Door Doctor, if you still don’t have that handyman trick in you, we are here available to assist.

    In comparison to other garage door service centers here in San Jose, we present better service for all sorts of repairs, replacement, and commercial garage door repair solutions.

    And if you are not from San Jose, no worries; we also have repair shops in other regions.

    Employing our certified specialists is the best thing to do when encountering overhead door difficulties.

    It’s safer to get in touch with us now for further support and quick reaction, so we can evaluate the process with you and how we can re-establish your garage door.

    Rate this page

    Recommended articles

    How To Fix Dented Garage Door

    How To Fix Dented Garage Door

    Nobody wants a dent or tear in their garage door. Aside from that, when your hardware is damaged, it may appear neglected. That’s why no matter how big or small the damage is, it can have a significant impact on the appearance of your property.

    24 Hour Garage Door Repair

    Garage Door Mechanics

    Many things can happen to the doors that guard your garage. As a result of exposure and various weather conditions, it’s best to maintain the state of the mechanism regularly. With many parts and aspects in the system, it’s quite easy to miss out on

    Garage Door Preventive Maintenance Checklist

    Garage Door Reinforcement Bar Installation

    There are many ways to strengthen the parts of the garage door. Too much movement can deform the parts of the mechanism. Metal bars may start to fold and break eventually. The door panels may thin out in their usual fold or curve in the

    How to Align Garage Door Sensors Chamberlain

    How to Align Garage Door Sensors Chamberlain

    Overhead door sensors are electronic components of the hardware that are part of the safety system. This component is responsible for keeping any object from being crushed by the garage door panel. That’s why, to ensure that the door moves smoothly and keeps you safe,

    Contact Us
    COVID-19 NOTICE:
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar