If you find yourself in a situation where your automatic garage door opener isn’t working, don’t panic! You can still open the door manually. In this step-by-step guide, we will walk you through how to do it. Keep in mind that if your garage door is heavy, it may be difficult to open manually. Make sure to use caution when opening a heavy garage door. Let’s get started!
How to open a garage door manually :
1. Disconnect the Automatic Garage Door Opener
The first step is to disconnect the automatic garage door opener. This will allow you to open the door manually without the risk of it closing on you. To do this, locate the release cord. This is usually a red cord that hangs down from the motor unit. If you can’t find it, check your garage door opener manual for its location.
2. Disengage the Automatic Opener From the Garage Door
Once you’ve found the release cord, pull it to disengage the trolley from the opener system. Now, open your garage door manually. If it’s heavy, you may need a friend or family member to help you.
Once the door is open, reattach the release cord to the trolley. This will ensure that the automatic opener is disengaged when you close the door.
3. Manually Lift the Garage Door
Now, it’s time to open the door. Start by lifting the door halfway up. Then, release it and let it fall back down to the ground. Once the door is all the way down, lift it up again until it’s about halfway open.
At this point, you should be able to see the brackets that hold the garage door in place. These brackets are usually located at the bottom of the door.
If your door doesn’t have these brackets, you can still open it manually. Just continue lifting the door until it’s all the way open.
Once the door is open, make sure to keep it in place by putting something heavy on the ground (like a brick or a piece of wood). This will prevent the door from closing on its own.
There you have it! Now you know how to open a garage door manually.
4. Lock the Door Manually
If you want to make sure the door stays open, you can lock it in place. To do this, find the locking mechanism on your garage door. It’s usually a small lever that’s located near the bottom of the door. Once you’ve found it, flip it up to lock the door in place.
Now, when you’re ready to close the door, simply disengage the locking mechanism. Then, lift the door and allow it to fall back down to the ground. Make sure to disconnect the automatic opener before you close the door completely.
Need Help with the Garage Door? Contact San Jose Garage Door Doctor!
We hope this guide was helpful. However, if you’re having trouble with your garage door, we recommend contacting a professional. At San Jose Garage Door Doctor, we specialize in garage door repair and maintenance. We’ll be happy to take a look at your door and see what needs to be done. Contact us today to schedule a consultation!
That’s it for this blog post! Thanks for reading. We hope you found it helpful. If you have any questions, feel free to leave a comment below. We’ll do our best to answer as quickly as possible. Thanks again!
The San Jose Garage Door Doctor team.
